﻿********************************************************************
KONICA MINOLTA Driver Packaging Utility
Version 3.0 - 3.0.1C400(For Universal Printer Driver)
                                                          2025/07/24 Rev.1
Copyright (C) 2006 KONICA MINOLTA, INC.
********************************************************************

This README file includes the following information. 
Please be sure to read through this document before use.

1. Introduction
2. System requirements
3. Supported printer drivers
4. Install / uninstall guide
5. Version confirmation in the application
6. Restrictions / known limitations
7. Individual Settings File
8. Package Creation File

********************************************************************
1. Introduction

The Driver Packaging Utility allows you to create an 
installation package that uses different settings to those used at 
the time of printer driver installation.

The following tools are included.

- KONICA MINOLTA Driver Package Manager Version 2.8 - 2.8.00400

  The Driver Package Manager is a Utility used to manage the installation 
  package created by the Driver Packaging Utility.
  It works in conjunction with the Driver Packaging Utility.

This version supports Universal Printer Driver ver. 3.5 or later only.

Supported devices:
    Baseline
    KONICA MINOLTA A3 common
    KONICA MINOLTA A4 common
    KONICA MINOLTA 501/421/361
    KONICA MINOLTA 751/601
    KONICA MINOLTA 362/282/222
    KONICA MINOLTA C652(DS)/C552(DS)/C452
    KONICA MINOLTA C360/C280/C220
    KONICA MINOLTA C35/C25/C35P/mc4750
    KONICA MINOLTA 751/601(Sol-ROM)
    KONICA MINOLTA 423/363/283/223
    KONICA MINOLTA 652/602/552/502
    KONICA MINOLTA 20
    KONICA MINOLTA 20P
    KONICA MINOLTA 42/36(EU/JP)
    KONICA MINOLTA 42/36
    KONICA MINOLTA C754(e)/C654(e)
    KONICA MINOLTA 195/215/235
    KONICA MINOLTA C554(e)/C454(e)/C364(e)/C284(e)/C224(e)
    KONICA MINOLTA 754(e)/654(e)
    KONICA MINOLTA 4700P/4000P/3300P/3301P
    KONICA MINOLTA 554e/454e/364e/284e/224e
    KONICA MINOLTA C3850/C3350/C3850FS
    KONICA MINOLTA 4020/3320
    KONICA MINOLTA 4750/4050
    KONICA MINOLTA 25e
    KONICA MINOLTA C3100P
    KONICA MINOLTA C3110
    KONICA MINOLTA C281/C221/C221s
    KONICA MINOLTA 367/287/227
    KONICA MINOLTA C368/C308/C258
    KONICA MINOLTA C287/C227
    KONICA MINOLTA 958/808/758
    KONICA MINOLTA C658/C558/C458
    KONICA MINOLTA 350/250/200
    KONICA MINOLTA C650/C550/C451
    KONICA MINOLTA C353/C353P/C253/C203
    KONICA MINOLTA 368/308
    KONICA MINOLTA 558/458
    KONICA MINOLTA C266/C226
    KONICA MINOLTA C3851/C3351/C3851FS
    KONICA MINOLTA 658e/558e/458e/368e/308e
    KONICA MINOLTA C759/C659
    KONICA MINOLTA 4702P/4402P/3602P
    KONICA MINOLTA 4422/3622
    KONICA MINOLTA 4752/4052
    KONICA MINOLTA WPH
    KONICA MINOLTA PullPrinting
    KONICA MINOLTA C360i
    KONICA MINOLTA C300i
    KONICA MINOLTA C250i
    KONICA MINOLTA C4050i
    KONICA MINOLTA C3350i
    KONICA MINOLTA C3320i
    KONICA MINOLTA C4000i
    KONICA MINOLTA C3300i
    KONICA MINOLTA 306i
    KONICA MINOLTA 266i
    KONICA MINOLTA 246i
    KONICA MINOLTA 226i
    KONICA MINOLTA 5020i
    KONICA MINOLTA 5000i
    KONICA MINOLTA 4020i
    KONICA MINOLTA 4000i
    KONICA MINOLTA C650i
    KONICA MINOLTA C550i
    KONICA MINOLTA C450i
    KONICA MINOLTA 650i
    KONICA MINOLTA 550i
    KONICA MINOLTA 450i
    KONICA MINOLTA 360i
    KONICA MINOLTA 300i
    KONICA MINOLTA C750i
    KONICA MINOLTA 750i
    KONICA MINOLTA 4750i
    KONICA MINOLTA 4050i
    KONICA MINOLTA 4700i
    KONICA MINOLTA C287i
    KONICA MINOLTA C257i
    KONICA MINOLTA C227i
    KONICA MINOLTA C286i
    KONICA MINOLTA C266i
    KONICA MINOLTA C226i
    KONICA MINOLTA 950i
    KONICA MINOLTA 850i
    KONICA MINOLTA C451i
    KONICA MINOLTA C361i
    KONICA MINOLTA C301i
    KONICA MINOLTA C251i
    KONICA MINOLTA C4051i
    KONICA MINOLTA C3351i
    KONICA MINOLTA C3321i
    KONICA MINOLTA C4001i
    KONICA MINOLTA C3301i
    KONICA MINOLTA C651i
    KONICA MINOLTA C551i
    KONICA MINOLTA 651i
    KONICA MINOLTA 551i
    KONICA MINOLTA 451i
    KONICA MINOLTA 361i
    KONICA MINOLTA 301i
    KONICA MINOLTA C751i
    KONICA MINOLTA 751i
    KONICA MINOLTA 4751i
    KONICA MINOLTA 4051i
    KONICA MINOLTA 4701i
    KONICA MINOLTA C4751i
    KONICA MINOLTA 5021i
    KONICA MINOLTA 5001i
    KONICA MINOLTA 4221i
    KONICA MINOLTA 4201i
    Server Less Ubiquitous Print

********************************************************************
2. System Requirements

  Support OS: 
    Windows 10 Home *
    Windows 10 Pro *
    Windows 10 Enterprise *
    Windows 10 Education *
    Windows 11 Home
    Windows 11 Pro
    Windows 11 Enterprise
    Windows 11 Education
    Windows Server 2016 Standard
    Windows Server 2016 Datacenter
    Windows Server 2019 Standard
    Windows Server 2019 Datacenter
    Windows Server 2022 Standard
    Windows Server 2022 Datacenter
    Windows Server 2022 Datacenter:Azure Edition
    Windows Server 2025 Standard
    Windows Server 2025 Datacenter
    Windows Server 2025 Datacenter:Azure Edition
    * The 32-bit (x86) and 64-bit (x64) editions of Windows are
      supported.

********************************************************************
3. Supported printer drivers

This utility supports the following printer drivers.

  KONICA MINOLTA Universal v3 (v3.5.0.0 or later)
    - KONICA MINOLTA Universal PCL
    - KONICA MINOLTA Universal PS
    - KONICA MINOLTA Universal PCL5

  KONICA MINOLTA Universal v3 (v3.9.0.0 or later)
    - KONICA MINOLTA Universal PCL
    - KONICA MINOLTA Universal PS
    - KONICA MINOLTA Universal FAX

********************************************************************
4. Install / uninstall guide

This utility does not require installation or uninstallation.

********************************************************************
5. Version confirmation in the application.

You can check the version from a running application with the 
following procedure.

 1. From the [Help] menu, select [About...] to display the 
    information dialog.
 2. This dialog displays the version information.

********************************************************************
6. Restrictions / known limitations

 6-1. Restrictions
  - When saving the package and overwriting other files, a folder 
    name appended with ".bak" is saved within the DPU folder.
    This folder cannot be deleted from the [Delete Package] menu of 
    this utility.
    Please delete it from Explorer.

  - When saving package fails, a folder name appended with ".err" 
    is saved within the DPU folder. 
    This folder cannot be deleted from the [Delete Package] menu of 
    this utility.
    Please delete it from Explorer.

  - When Windows settings for your computer are as follows: 
    "Control Panel > Administrative Tools > Local Security Policy > 
    Security Settings > Local Policies > Security Options > 
    Accounts: Limit local account use of blank passwords to console 
    logon only" is Enabled, then in the [Save Package] Dialog, 
    if [Switch to the following user when executing the package] is 
    selected and the [Password] is left blank, package execution 
    may fail.

  - The individual settings file is in CSV format. If the last line 
    of the file is not completed properly with a line-feed, an 
    error may be occur.
    Please enter a line-feed at the end of the last line of the 
    file.

  - Please input the comment of the printer within 127 characters
    to set the [Add Printer].

  - Please input the printer name within 40 characters to set the
    [Add Printer].

  - It is necessary to satisfy the following conditions in order
    to register [Add Printer], [Update Driver] and [Delete Driver]
    with [List of Operation].
    - The same name as the printer which will be registered to
      [List of Operation] is not registered.
    - The same driver as the driver which will be registered to
      [List of Operation] is not registered.

  - In the Windows Vista operates on the 64bit PC, when the package
    is unpacked to the same PC without restarting after the package
    is created by Driver Package Utility, the following functions
    dose'nt operate correctly.
    - [Add Printer]/[Preference]/[Copy from this Printer]
    - [Add Printer]/[Preference]/[Copy from specified file]
    Please unpack the package after rebooting PC in order to use
    these functions.

  - Following items can be set in the driver from the package created
    using Driver Package Utility.
    - Items that can be reflected in [Favorite Setting]
    - [Excel Job Control] in [Other] tab
    - Items set in [Individual Settings File]

  - The products described in "2. System Requirements" and 
    "3. Supported printer drivers" may not be available or 
    the product names may differ in some countries and regions.

  - Models that can create a setup file with 
    [File] - [Create Universal Printer Driver Setup File] are 
    supported by Universal Print Driver Version 3.5.0.0 or later.

********************************************************************
7. Individual Settings File

The individual settings file is written using the CSV format.
Rows beginning with "#" are comment rows.
The first non-comment row is the header row. The "user_name" column 
in the header row indicates the user name. Otherwise, columns are 
named for individual settings.
Enter the name of each user executing the package and the 
corresponding settings on each row following the header row.
In the column of [Item name(Action)], enter the action for each set value.

  0       -> [Select default setting]
  1       -> [Lock setting]
  Blank   -> [None]

In the column of [Item name (Value)], enter the setting value.

  [SelectColor]
     When you enter the following keywords, set [SelectColor] as shown below.

     FullColor               -> [Full Color]
     AutoColor               -> [Auto Color]
     Grayscale               -> [Gray Scale]
     2Color_BlackRed         -> [2 Color (Black+Red)]
     2Color_BlackGreen       -> [2 Color (Black+Green)]
     2Color_BlackBlue        -> [2 Color (Black+Blue)]
     2Color_BlackCyan        -> [2 Color (Black+Cyan)]
     2Color_BlackMagenta     -> [2 Color (Black+Magenta)]
     2Color_BlackYellow      -> [2 Color (Black+Yellow)]
     2Color_BlackChineseRed  -> [2 Color (Black+Chinese Red)]

  [DoubleSides]
    When you enter the following keywords, set [Print Type] as shown below.

     Simplex  -> [1-Sided]
     Duplex   -> [2-Sided]
     Booklet  -> [Booklet]

  [OutputMethod]
    When you enter the following keywords, set [Output Method] as shown below.

     NormalPrint     -> [Print]
     SecurePrint     -> [Secure Print]
     SaveBox         -> [Save in User Box]
     SaveBoxAndPrint -> [Save in User Box/Print]
     ProofPrint      -> [Proof Print]
     TouchAndPrint   -> [ID&Print]
     StoreJob        -> [Store Job]
     PrintHold       -> [Print and Hold]

  [SecureID]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Secure Print] - [Document ID]

  [SecurePassword]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Secure Print] - [Password]

  [BoxFileName]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Save in User Box] - [File Name]

  [BoxNumber]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Save in User Box] - [User Box Number]

  [Password]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Job Retention] - [User Settings] - [Password]

  [HidePassword]
    When you enter the following keywords, 
    set [Job Retention] - [User Settings] - [Hide Password] as shown below.

     On   -> [Hide Password] = ON
     Off  -> [Hide Password] = OFF

  [AuthUserType]
    When you enter the following keywords, set [User Authentication] as shown below.

     PublicUser    -> [Public User]
     RecipientUser -> [Recipient User]

  [RecipientUserName]
    When you enter the following keywords, 
    set [User Authentication] - [User Name]as shown below.

     WinLoginUser -> "Windows Login ID" is set.
     UserPrincipalName  -> "UserPrincipalName"is set.
     Arbitrary value -> The entered value is set.

  [RecipientPassword]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [User Authentication] - [Password]

  [ServerSetting]
    When specifying either one of keywords listed below, the value according 
    to the keyword will be set to 
    [User Authentication Server Settings] - [Server Setting].

     Server01  -> [Server Setting] = Server1
     Server02  -> [Server Setting] = Server2
     Server03  -> [Server Setting] = Server3
     Server04  -> [Server Setting] = Server4
     Server05  -> [Server Setting] = Server5
     Server06  -> [Server Setting] = Server6
     Server07  -> [Server Setting] = Server7
     Server08  -> [Server Setting] = Server8
     Server09  -> [Server Setting] = Server9
     Server10  -> [Server Setting] = Server10
     Server11  -> [Server Setting] = Server11
     Server12  -> [Server Setting] = Server12
     Server13  -> [Server Setting] = Server13
     Server14  -> [Server Setting] = Server14
     Server15  -> [Server Setting] = Server15
     Server16  -> [Server Setting] = Server16
     Server17  -> [Server Setting] = Server17
     Server18  -> [Server Setting] = Server18
     Server19  -> [Server Setting] = Server19
     Server20  -> [Server Setting] = Server20

  [AuthEngine]
    When specifying either one of keywords listed below, the value according 
    to the keyword will be set to [MFP Authentication] as a default.
    When you enter the following keywords, set [MFP Authentication] as shown below.

     On   -> [MFP Authentication] = ON
     Off  -> [MFP Authentication] = OFF

  [DepartmentName]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Account Track] - [Department Name]

  [DepartmentPassword]
    When an arbitrary value is entered, the value entered in the following setting is set.

    [Account Track] - [Password]

  [SingleSignOn]
    When you enter the following keywords, 
    set [Enable Single Sign-On functionality for printing functions] as shown below.

     On   -> [Enable Single Sign-On functionality for printing functions] = ON
     Off  -> [Enable Single Sign-On functionality for printing functions] = OFF


********************************************************************
8. Package Creation File

  8-1. Introduction
    Package Creation File is in CSV format.
    Rows beginning with "#" are comment rows.
    The first non-comment row is the header row. 
    Otherwise, columns are named for each external input.
    Enter the settings of new package configured in the Add Printer operation on each row following the header row.  
 
  8-2. About Report File
    On [Batch creation of Multiple Packages], Report file (dpu_import_report.txt) is created 
    in the same directory of input file.
    During [Batch creation of Multiple Packages], please check the report file.
    * Input error details, notification regarding update of existing package, etc. are output in the Report file.

  8-3. Restrictions
    - Do not enclose each setting in double quotes.
    - Setting should not contain ",". If "," is included in the setting, the operation is not secured.
    - Make sure to add a new line at the last row of file.
    - Save file in the character code (Japan: Shift_JIS) that corresponds to the system location of OS.
    - When describing 2 or more additional operations in 1 Package, setting of same package 
      should be described continuously.
    - If same name package already exists in the package creation path, it is overwritten after taking a backup.

  8-4. Package settings
  [1. Package Saved folder]
    Item name   : PackageSavedFolder
    Set contents : Destination folder to save the Package is set.
      
     0     -> [Common Folder]
     1     -> [Individual Folder]

  [2. Package Name]
    Item name   : PackageName
    Set contents : File name to save the created package is set.
                     Enter within 50byte.

  [3. Package Comment]
    Item name   : PackageComment
    Set contents : Package comment is set.
                     Enter within 127byte.

  [4. Interactive Installation Option]
    Item name   : InstallSetting
    Set contents : During the installation of the Driver package, Interactive installation options can be set as.

        0     -> [Display]
        1     -> [Do not display]
        2     -> [Display only Start/End result]

  [5. Change user at the time of Package execution]
    Item name   : ChangeUser
    Set contents : Whether or not to change the specified user at the time of package execution is set.

        0     -> [Do not change user]
        1     -> [Change user]

  [6. User Name]
    Item name   : UserName
    Set contents : User name to be changed at the time of package execution is set.
	               Enter within 20 bytes.

  [7. Password]
    Item name   : PassWord
    Set contents : User Password to be changed at the time of package execution is set.
                   Enter within 30 bytes.

  [8. Domain Name]
    Item name   : DomainName
    Set contents : User domain name to be changed at the time of package execution is set.
                   Enter within  64 bytes.

  [9.  Package log path]
    Item name   : LogPath
    Set contents : Destination to save log at the time of package execution is set.
                   When save path is not set, it will be saved in the same folder where the package file was executed.

  [10. Printer Name]
    Item name   : PrinterName
    Set contents : Name of Printer to be added is set.
                   Enter within 40 bytes.

  [11. Printer Comment]
    Item name   : PrinterComment
    Set contents : Comment of printer to be added is set.
                   Enter within 127 bytes.

  [12. Default Printer Settings]
    Item name   : DefaultPrinter
    Set contents : Whether or not to set the printer to be added as Default Printer is set.
    
        0     -> [Do not set Default Printer]
        1     -> [Set Default Printer]

  [13. Do not add if a printer with specified name exists.]
    Item name   : StrictPrinter
    Set contents : When a Printer exists with the same name of specified printer, do not add a new printer. 
    
        0     -> [Add Printer]
        1     -> [Do not add Printer]

  [14. Print Setting]
    Item name   : PrintSetting
    Set contents : Printer Setting of a printer to be added is set.
    
        0     -> [Do not copy]
        1     -> [Copy from this Printer]
        2     -> [Copy from specified file]

  [15. Print Setting original Printer name]
    Item name   : OriginPrinterName
    Set contents : Original printer of a printer to be added is set.

  [16. Path of Print setting file]
    Item name   : SettingFile
    Set contents : Print setting file in which the print setting to be changed is set.

  [17. Default Print Setting]
    Item name   : DefaultProperty
    Set contents : Default Print setting of a printer to be added is set.

        0     -> [Do not set as default setting]
        1     -> [Set as Default setting]

  [18. Printer Driver name]
    Item name   : DriverName
    Set contents : Driver name of printer is set.

  [19. Printer driver path (32bit)]
    Item name   : 32bitDriverPath
    Set contents : Path of 32bit Windows Driver file is set.

  [20. Printer driver path(64bit)]
    Item name   : 64bitDriverPath
    Set contents : Path of 64bit Windows Driver file is set.

  [21. Port Type]
    Item name   : PortType
    Set contents : Port type of a Printer to be added is set.

        0     -> [IP Address/Host Name]
        1     -> [URL]

  [22. Port Name]
    Item name   : PortName
    Set contents : Port name of a Printer to be added is set.

  [23. SNMP Enable Settings]
    Item name   : SNMPEnabled
    Set contents : SNMP status of a Printer to be added is set.

        0     -> [Disable SNMP]
        1     -> [Enable SNMP]

  [24. Individual Setting]
    Item name   : IndividualSetting
    Set contents : Individual setting is set.

        0     -> [Do not perform Individual Setting]
        1     -> [Use Logon User Name automatically]
        2     -> [Request User Name input]

********************************************************************
Windows is a trademark of Microsoft Corporation in the United States
and other countries.
The company name(s) and the product name(s) are the registered 
trademarks or trademarks of the company.
